Choosing the correct fountain pump for your water feature can feel like cracking a secret code: especially when you’re staring at a package full of terms like GPH, max head, and wattage.
But once you understand what each of these measurements means, finding the perfect pump becomes a whole lot easier. Let’s break it all down so you can shop smarter and avoid unnecessary frustrations.
Start with GPH: Gallons Per Hour
The first and most important number to look at is the GPH or gallons per hour. This tells you how much water the pump can circulate in one hour. A simple rule? Your fountain or pond should ideally circulate all its water once per hour.
So, if your water feature holds 50 gallons, look for a pump that offers at least 50 GPH. And yes, it’s okay to go over! A pump with higher GPH just means more power, which you can dial back using diverters or flow valves if necessary.
Understand Max Head Height
Max head, or head height, is a critical measurement that indicates how high the pump can push water vertically from the water’s surface. For simple vertical fountains, just measure from the water level to the highest point the water needs to reach.
However, things get trickier with multi-level or cascading water features. In these setups, you’ll need to calculate both the vertical height and a fraction of the horizontal distance (typically one-tenth) to ensure your pump has enough power to do the job.
Always aim for a little more than you think you need to compensate for resistance in tubing and fittings.
Max Lift vs. Max Head: Know the Difference
Though similar, max lift and max head aren’t quite the same. Max lift is measured from the pump itself (not the water’s surface) to the highest point the water needs to reach. If your pump is sitting deep in a pond, max lift becomes more relevant. Pay attention to this if your pond is particularly deep, and make sure your pump can physically handle lifting water the required distance.
Other Numbers: Voltage and Wattage
While these may sound important, voltage and wattage are less critical in everyday decision-making. Most small backyard pumps come with manufacturer-set voltage levels that are safe and appropriate for their intended use. If you’re concerned about safety, a lower voltage is typically safer. Just avoid going over 120V unless you’re prepared to deal with permits and professional installation.
Wattage, on the other hand, mainly relates to energy consumption—not performance. A 12-watt pump might do the same job as a 120-watt pump, just with different power sources. It’s useful for calculating energy costs but won’t help you choose the right pump size.
In summary, focus on GPH, max head, and cord length. Don’t let the technical jargon confuse you—these three numbers will guide you to a pump that keeps your water feature flowing beautifully.
For more information about Sugar Kettle Fountain and Corten Steel Fountain Please visit: Blue Thumb.
